home      |      sitemap      |      contact
Toll-Free: 800 346-4729
search our site
  Products & Services   »  Sanitary   »  Alfa Laval   »  Pumps

LKH

00001057
The Premium Pump
LKH Centrifugal Pump
LKH-10

Applications

The LKH pump is a highly efficient and economical centrifugal pump, which meets the requirements of sanitary and gentle product treatment and chemical resistance. LKH is available in eleven sizes, LKH-5, -10, -15, -20, -25, -35, -40, -45, -50, -60, -70 and -90

Standard design

The LKH pump consists of a standard motor, stub shaft, mechanical compression coupling (LKH-5 with set screws), adaptor, back plate, impeller, impeller screw, pump casing and shaft seal. (LKH-5 has clamp connection between pump casing and back plate). The LKH pump is designed for CIP with emphasis on large internal radii and cleanable seals.

Shaft seals

The LKH pump is equipped with either an external single or a flushed shaft seal. Both have stationary seal rings in acid-resistant steel AISI 329 with sealing surface in silicon carbide and rotating seal rings in carbon. The secondary seal of the flushed seal is a long lasting lip seal. The pump may also be equipped with a double mechanical shaft seal.

Materials

Product wetted steel parts:Acid-resistant steel AISI 316L and AISI 329L
Other steel parts:Stainless steel AISI 304
Finish:Polished ≤32Ra. and 3A approved
Product wetted seals:EPDM rubber.

Technical data

Max. inlet pressure (dynamic)
LKH-587 PSI
LKH-10 - LKH-60145 PSI
LKH-70 - LKH-9072.52 PSI
LKH-9072.52 PSI
Temperature range14°F to +284° F (EPDM)
Noise level (at 3.3 ft.):60 - 85 dB (A).

Flushed shaft seal (LKH-5 to LKH-90):

Water pressure inlet:Max. 14.5 PSI.
Water consumption:4-8 usgph

Double mechanical shaft seal:

Water pressure inlet, LKH-5 to -60:Max. 72.5 PSI.
Water pressure inlet, LKH-70 and -90:Max. 43.5 PSI.
Water consumption:4-8 usgph

Connections for FSS and DMSS

R 1/8" (BSP) external thread.

Motor

Standard C-faced, foot mounted motor according to NEMA standard. 3500 RPM or 1750 RPM. Standard efficiency, Class F. Note frame size per horsepower.

LKH-90 4 poles = 1500/1800 RPM at 72.52/145 PSI.

Voltage and frequency

3 phase, 60 HZ, 230/460V standard. Other voltages and frequencies available upon request.

Dimensions (in)


LKH-5
Size Motor
1 Hp (56C) 1.5 Hp (143TC) 2 Hp ( 145TC) 3 HP (182TC)
LKH-10
Size Motor
1 Hp (143TC) 1.5 Hp (143TC) 2 Hp ( 145TC) 3 HP (182TC) 5 Hp (184TC) 7.5 Hp (213TC) 10 Hp ( 215TC)
A4.004.005.004.505.505.507.00
F9.729.729.729.729.729.729.72
H3.503.503.503.503.503.503.50
L16.9116.9118.2219.4119.6923.2024.74
Q3.433.433.433.433.433.433.43
T3.503.503.504.504.505.255.25
LKH-15
Size Motor
1 Hp (143TC) 1.5 Hp (143TC) 2 Hp ( 145TC) 3 Hp (182TC) 5 Hp (184TC) 7.5 Hp (213TC) 10 Hp ( 215TC) 15 Hp (254TC)
A4.004.005.004.505.505.507.007.00
F9.729.729.729.729.729.729.729.72
H3.503.503.503.503.503.503.503.50
L18.3318.3319.3220.3321.3824.6225.0329.76
Q2.612.612.612.612.612.612.612.61
T3.503.503.504.504.505.255.255.25

Dimensions (in)


LKH-20
Size Motor
1 Hp (143TC) 1.5 Hp (143TC) 2 Hp (145TC) 3 HP (182TC) 5 Hp (184TC) 7.5 Hp (213TC) 10 Hp (215TC) 15 Hp (254TC)
A4.004.005.004.505.505.507.008.25
F9.969.969.969.969.969.969.969.96
H3.503.503.503.503.503.503.503.50
L17.3817.3818.2819.3720.4223.6725.2128.82
Q3.473.473.473.473.473.473.473.47
T3.503.503.504.504.505.255.255.25
LKH-25
Size Motor
1 Hp (143TC) 1.5 Hp (143TC) 2 Hp (145TC) 3 HP (182TC) 5 Hp (184TC) 7.5 Hp (213TC) 10 Hp (215TC) 15 Hp (254TC) 20 Hp (256TC) 25 Hp (284TSC) 30 Hp (286TSC)
A4.005.005.004.505.505.507.008.2510.009.5011.00
F11.9311.9311.9311.9311.9311.9311.9311.9311.9311.9311.93
H3.503.503.503.503.503.503.503.503.503.503.50
L17.9117.9118.9019.9120.9624.2025.7429.1630.9132.9134.41
Q4.174.174.174.174.174.174.174.174.174.174.17
T3.503.503.504.504.505.255.256.256.257.007.00

Dimensions (in)


LKH-35
Size Motor
1.5 Hp (143TC) 2 Hp (145TC) 3 HP (182TC) 5 Hp (184TC) 7.5 Hp (213TC) 10 Hp (215TC) 15 Hp (254TC) 20 Hp (256TC) 25 Hp (284TSC) 30 Hp (286TSC)
A4.005.004.505.505.507.008.2710.009.4911.00
F11.9311.9311.9311.9311.9311.9311.9311.9311.9311.93
H3.503.503.503.503.503.503.503.503.503.50
L17.1118.1019.1020.1520.1524.9428.5530.3032.3033.80
Q4.684.684.684.684.684.684.684.684.684.68
T3.503.504.504.505.255.256.256.257.007.00
LKH-40
Size Motor
1.5 Hp (143TC) 2 Hp (145TC) 3 HP (182TC) 5 Hp (184TC) 7.5 Hp (213TC) 10 Hp (215TC) 15 Hp (254TC) 20 Hp (256TC) 25 Hp (284TSC) 30 Hp (286TSC)
A4.005.004.505.505.507.008.2510.009.5011.00
F12.9512.9512.9512.9512.9512.9512.9512.9512.9512.95
H3.503.503.503.503.503.503.503.503.503.50
L

 

 

For for more information about our products and services, contact us today!

 

 

 
HOME   |   ABOUT US   |   PRODUCTS AND SERVICES   |   OUR-MANUFACTURERS   |   CONTACT US
Copyright © 2017 Heerema Company
200 Sixth Avenue Hawthorne, NJ 07506   •   Phone: 973-423-0505   •   Outside NJ: 800-346-4729   •  Fax: 973-427-8672 
E-mail: sales@heeremacompany.com
web site design and development by powersolution.com:
also providing quality IT support and computer network services in New Jersey and beyond.


site admin