|Toftejorg SaniMicro Rotary Spray Head|
The Toftejorg SaniMicro is a rotary spray head that uses cleaning media to provide coverage and impact. The device represents an effective alternative to traditional static spray balls because it uses low volumes of cleaning fluid at low pressure. The double ball bearing in the Toftejorg SaniMicro’s rotating head makes the device suitable for all industrial cleaning applications, including tanks, reactors, vessels and other containers ranging from 0.05 to 1 m3 (10 - 250 US gallons), depending on dimensions and cleaning task. Assistance with optimal application positioning and other technical recommendations are available in CAS format.
The flow of the cleaning media causes the head of the Toftejorg SaniMicro to rotate, and the fan-shaped jets lay out a swirling pattern throughout the tank or reactor. This generates the impact needed for the efficient removal of residual product; the cascading flow covers all internal surfaces of the vessel.
|360°/360° Low Flow||270° up/270° up Low Flow||180° down|
The Toftejorg SaniMicro is available in Hastelloy C22 and 1.4404 (316).
Housing, Inlet connection, Head: 1.4404 (316L), Balls:SAF + PTFE.
|Weight:||75 g (0.2 lbs) |
|Lubricant:||Self-lubricating with the cleaning fluid |
|Working pressure:||1 - 3 bar (14.5 - 44 psi)|
|Recommended pressure:||1 - 2 bar (14.5 - 29 psi)|
|Max. working temperature:||95 °C (203 °F)|
|Max. ambient temperature:||140 °C (287 °F)|
|Spray Pattern: ||Cleaning pattern 360°, 360°LF, 270°, 270°LF, 180°DMax. radius 400 mm |
|Wetting radius:||Max. radius 1 m (3.28 ft.)|
|Min. tank opening:||25 mm (1 inch) diameter (DN 25)|
|Connection:||3/8” Rp (BSP) or NPT thread, Clip-on or weld-on for pipe|
Please specify desired spray pattern, required connections, material selection and type of certification required. Please also confirm the application suitability.
Downpipe assemblies with Tri-Clamp fittings and flange connections.
2.2 - 3.1.B - ATEX
|Flow Rate || ||Cleaning Radius |
| || || |
| || || |
|Dimensions (mm) || || |
| || || |
DIN Range 1: ø18.2
BPE US / DIN range 2 : 19.2
|OD x t|
ISO: 17.2 x 1
DIN Range 1: 18 x 1
DIN Range 2: 19 x 1.5
BPE US: 19.05 x 1.65